arch=arm
baudrate=115200
board=mvebu_armada-37xx
board_name=mvebu_armada-37xx
bootcmd=mmc dev 0; ext4load mmc 0:1 $kernel_addr_r $image_name;ext4load mmc 0:1 $fdt_addr_r $fdt_name;setenv bootargs $console root=PARTUUID=89708921-01 rw rootwait net.ifnames=0 biosdevname=0; booti $kernel_addr_r - $fdt_addr_r
bootdelay=2
console=console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000
cpu=armv8
eth1addr=6C:42:AB:00:36:01
eth2addr=6C:42:AB:00:36:02
eth3addr=6C:42:AB:00:36:03
eth4addr=6C:42:AB:00:36:04
eth5addr=6C:42:AB:00:36:05
eth6addr=6C:42:AB:00:36:06
eth7addr=6C:42:AB:00:36:07
ethaddr=F0:AD:4E:28:8F:B8
ethprime=eth0
extra_params=pci=pcie_bus_safe
fdt_addr_r=0x6f00000
fdt_high=0xffffffffffffffff
fdt_name=boot/armada-3720-ccpe.dtb
gatewayip=10.4.50.254
get_images=tftpboot $kernel_addr_r $image_name; tftpboot $fdt_addr_r $fdt_name; run get_ramfs
get_ramfs=if test "${ramfs_name}" != "-"; then setenv ramdisk_addr_r 0x8000000; tftpboot $ramdisk_addr_r $ramfs_name; else setenv ramdisk_addr_r -;fi
hostname=marvell
image_name=boot/Image
initrd_addr=0xa00000
initrd_size=0x2000000
ipaddr=0.0.0.0
kernel_addr_r=0x7000000
loadaddr=0x6000000
netdev=eth0
netmask=255.255.255.0
pcb_rev=1.0.0
pcb_sn=Z102129000136
ramdisk_addr_r=0x8000000
ramfs_name=-
root=root=/dev/nfs rw
rootpath=/srv/nfs/
serial_number=CPE-2231-000133
serverip=0.0.0.0
set_bootargs=setenv bootargs $console $root ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:none nfsroot=$serverip:$rootpath,tcp,v3 $extra_params $cpuidle
soc=mvebu
vendor=Marvell